AC/DC Enclosed Switching SMPS LM50-22B12 Switch Mode Power Supply 12V 4.2A 50W Also Deals LM50-20B12 AC to DC Converter With Universal Input Voltage of Single Phase 115VAC & 230VAC 50/60hz.
Safety ClassCLASS I CertificationCE, CQC Efficiency at 230VAC 87% EMC standardsCISPR32/EN55032 CLASS B, IEC/EN61000-3-2 CLASS A, IEC/EN 61000-4-3 10V/m
LED indicator for power on Operating ambient temperature range: – 30℃ ~ +70℃
Output Voltage: 12V / Output Current: 4.2A – 50W
Input Voltage: 110VAC – 240VAC
Enclosed Type Single Output SMPS
Tag: Applications
Wavex Silicone Emulsion 1kg | All in One Universal Polish for Automotive, Household and Industrial Applications
Product Description
WaveX brings to you the WaveX Silicone Emulsion. An industrial grade silicone emulsion that is used in the auto care, plastic and rubber industries. Available in 1 kg, 5kg and 20 kg pack sizes, the WaveX Silicone Emulsion is undoubtedly an impeccable quality industrial chemical.
About Silicone Emulsion:
Silicone Emulsions are basically non-toxic heat stable products that are created when silicone oil spreads in liquids with the assistance of surfactants. They are used in industries that benefit from its physical properties such as water repellency, heat stability, and high resistance to UV rays.
Silicone Emulsions also happen to be safe alternatives for organic solvents as they tend to meet most safety, health and environmental regulations.
Silicone Emulsions provide a range of pH options, active levels, and physical properties that make it possible to modify the material to your intended purpose which is one of the many reasons why it is being extensively used in the auto care industry.
The WaveX Silicone Emulsion can be used across multiple surfaces such as those made of plastics, leathers, vinyl or rubber. The WaveX Silicone Emulsion would work wonderfully well on gym equipment such as gym plates/ dumbles made of rubber or plastic, floor mats made of rubber, gym rods with fiber grips, leather ‘waist support’ belts, treadmill’s rubber belt and many other components.
Acts as a general surface polish for vehicle interiors. It is recommended for the vehicle’s interior plastic, leather, vinyl and rubber components.
To use the WaveX Silicone Emulsion on a vehicle’s interior plastic components, pour a couple of drops of Silicone Emulsion onto the WaveX Yellow Foam Applicator and evenly apply it on its surface.
The WaveX Silicone Emulsion acts as a wonderful dresser for leather component of your vehicle’s interior. Whether its leather seats, leather armrests or any leather components, using the WaveX Silicone Emulsion will help you in protecting them and preventing them from cracking.
WaveX Silicone Emulsion helps maintain the supple texture of vehicle dashboards whilst providing them with a light shine.
Undoubtedly the best dresser for rubber components. Using the WaveX Silicone Emulsion will enhance its life and will prevent them from cracking or withering.
Perfect for plastic, leather, rubber, and vinyl surfaces in cars, homes, and industrial settings.
Mixes easily with water, allowing for customized concentration for various applications.
Super thick formulation with high active content for long-lasting protection and shine.
Apply directly to the surface, spread evenly, and wipe off with a cloth or applicator for a polished finish.
Non-toxic composition meets health and environmental standards, making it safe for various uses.
Ideal for car interiors (plastic, leather, vinyl, and rubber components). Suitable for household surfaces, gym equipment (rubber mats, dumbbells, treadmill belt), industrial equipment, marine applications, agricultural tools, sports gear, footwear care, electronic devices, office furniture, outdoor furniture, appliances, luggage, crafts, pet accessories, musical instruments, restaurant equipment and many more.
CoCud Twist Drill Bits, 8mm Cutting Edge, Titanium & Nitride Coated High Speed Steel 4341 Round Shank – (Applications: for Stainless Steel Drilling Machine), 2-Pieces
Attributes:
* Cutting Edge Diameter: 8mm / 0.31″
* Shank Diameter: 8mm / 0.31″
* Cutting Edge Length: 75mm / 2.95″
* Overall Length: 115mm / 4.53″
* Material: High Speed Steel 4341
* Finish: Titanium & Nitride Coated
* Shank Type: Round Shank
What Is Included:
* 2 Pieces x Twist Drill Bits
Applications & Features:
— Widely used for drilling stainless steel, aluminum alloy, iron, copper, brass, hard wood, hard plastic, and other metal materials in maintenance departments, machine shops, and other industries. For use on drill presses and bench drills. Selecting the correct lubricant is beneficial for cutting or cooling. Makes cutting easier, improves dimensional accuracy and extends tool life.
— The straight shank drill is made of 4341 high-speed steel, with high hardness, good toughness, high strength, and high wear resistance. The dual coating of gold titanium and black nitride provides better lubricant application, smoother drilling, and is more durable and corrosion resistant than regular black surfaces. Sharp spiral flutes provide fast, neat and smooth cuts. The spiral groove facilitates the export of metal chips, which saves time and effort in operation.
Useful Tips:
— Drilling edges with burrs: Reduce the number of holes drilled and check various cutting conditions to ensure proper tool handling. Reduce forward and reverse speed. Use harder aluminum and wood. Select the appropriate cutting parameters. Drill metal with high hardness, the rotational speed should be slower than normal drilling.
★ Drill Bit Size — Cutting edge diameter: 8mm / 0.31″; shank diameter: 8mm / 0.31″; cutting edge length: 75mm / 2.95″; overall length: 115mm / 4.53″; shank type: round shank
★ Wide Applications — Widely used for drilling stainless steel, aluminum alloy, iron, copper, brass, hard wood, hard plastic, and other metal materials in maintenance departments, machine shops, and other industries. For use on drill presses and bench drills.
★ Dual Coatings — The dual coatings of gold titanium and black nitride provides better lubricant application, smoother drilling, and is more durable and corrosion resistant than regular black surfaces.
★ High Speed Steel — The straight shank drill is made of 4341 high-speed steel, with high hardness, good toughness, high strength, and high wear resistance. Sharp spiral flutes provide fast, neat and smooth cuts.
★ Useful Tips — Choosing the correct lubricant is beneficial for cutting or cooling. Makes cutting easier, improves dimensional accuracy and extends tool life. Check various cutting conditions to ensure proper tool handling.
CoCud Solid Carbide Drill Bits, 4.75mm Diameter, K35 Tungsten Carbide Precision Mini Twist Drill Bits – (Applications: for Stainless Steel Alloy Metal), 1-Piece
Attributes:
* Drilling Diameter: 4.75mm / 0.187″
* Tool Flute Length: 25mm / 0.98″
* Shank Diameter: 4.75mm / 0.187″
* Overall Length: 50mm / 1.97″
* Material: K35 Tungsten Carbide
* Average Cobalt Content: 10%
* Tool Flute Type: Spiral
* Cutting Hardness: up to HRC50
* Processing Technology: Fine Grinding
What Is Included:
* 1 Piece x Carbide Drill Bits
Applications & Features:
— Suitable for drilling stainless steel, alloy steel, carbon steel, die steel, tool steel, copper, hard plastic and other materials below HRC50. Widely used in maintenance departments, machine shops, and other industries. Use on machining centers, CNC lathes, drill presses and bench drills. The correct lubricant can facilitate cutting or cooling, make cutting easier, and improve dimensional accuracy and extend tool life
— K35 tungsten carbide is a micro grain tungsten-cobalt alloy with an average cobalt content of 10%. The solid carbide drill bits has high hardness (91.5HRA), wear resistance, corrosion resistance, high strength, good bending resistance and high heat resistance. Provides faster cutting speeds than other substrates and is harder but more brittle. Carbide material with good drilling properties ensures high working efficiency. Sharp spiral flutes provide fast, neat and smooth cuts. The spiral groove facilitates the export of metal chips, which saves time and effort in operation.
Useful Tips:
— Keep cool and gentle when using. Not recommended for use with a hand drill (easy to shake, poor stability). If there is a problem with chip evacuation, go back in time and remove the chips. Be careful and control your CNC speed. Drill metal with high hardness, the rotational speed should be slower than normal drilling.
★ Carbide Drill Bit Size — Drilling diameter: 4.75mm / 0.187″; tool flute length: 25mm / 0.98″; shank diameter: 4.75mm / 0.187″; overall length: 50mm / 1.97″; tool flute type: spiral; cutting hardness: up to HRC50; processing technology: fine grinding
★ Wide Applications — Suitable for drilling stainless steel, alloy steel, carbon steel, die steel, tool steel, copper, hard plastic and other materials below HRC50. Widely used in maintenance departments, machine shops, and other industries. Use on machining centers, CNC lathes, drill presses and bench drills.
★ Spiral Flutes — The spiral groove facilitates the export of metal chips, which saves time and effort in operation. Sharp flutes provide fast, neat and smooth cuts. Provides faster cutting speeds than other substrates and is harder but more brittle. Be careful and control your CNC speed.
★ K35 Tungsten Carbide — It is a micro grain tungsten-cobalt alloy with an average cobalt content of 10%. The solid carbide drill bits has high hardness (91.5HRA), wear resistance, corrosion resistance, high strength, bending resistance and high heat resistance.
★ Useful Tips — Keep cool and gentle when using. Not recommended for use with a hand drill (easy to shake, poor stability). If there is a problem with chip evacuation, go back in time and remove the chips. Drill metal with high hardness, the rotational speed should be slower than normal drilling.
CoCud Solid Carbide Drill Bits, 5.55mm Diameter, K35 Tungsten Carbide Precision Mini Twist Drill Bits – (Applications: for Stainless Steel Alloy Metal), 1-Piece
Attributes:
* Drilling Diameter: 5.55mm / 0.219″
* Tool Flute Length: 30mm / 1.18″
* Shank Diameter: 5.55mm / 0.219″
* Overall Length: 50mm / 1.97″
* Material: K35 Tungsten Carbide
* Average Cobalt Content: 10%
* Tool Flute Type: Spiral
* Cutting Hardness: up to HRC50
* Processing Technology: Fine Grinding
What Is Included:
* 1 Piece x Carbide Drill Bits
Applications & Features:
— Suitable for drilling stainless steel, alloy steel, carbon steel, die steel, tool steel, copper, hard plastic and other materials below HRC50. Widely used in maintenance departments, machine shops, and other industries. Use on machining centers, CNC lathes, drill presses and bench drills. The correct lubricant can facilitate cutting or cooling, make cutting easier, and improve dimensional accuracy and extend tool life
— K35 tungsten carbide is a micro grain tungsten-cobalt alloy with an average cobalt content of 10%. The solid carbide drill bits has high hardness (91.5HRA), wear resistance, corrosion resistance, high strength, good bending resistance and high heat resistance. Provides faster cutting speeds than other substrates and is harder but more brittle. Carbide material with good drilling properties ensures high working efficiency. Sharp spiral flutes provide fast, neat and smooth cuts. The spiral groove facilitates the export of metal chips, which saves time and effort in operation.
Useful Tips:
— Keep cool and gentle when using. Not recommended for use with a hand drill (easy to shake, poor stability). If there is a problem with chip evacuation, go back in time and remove the chips. Be careful and control your CNC speed. Drill metal with high hardness, the rotational speed should be slower than normal drilling.
★ Carbide Drill Bit Size — Drilling diameter: 5.55mm / 0.219″; tool flute length: 30mm / 1.18″; shank diameter: 5.55mm / 0.219″; overall length: 50mm / 1.97″; tool flute type: spiral; cutting hardness: up to HRC50; processing technology: fine grinding
★ Wide Applications — Suitable for drilling stainless steel, alloy steel, carbon steel, die steel, tool steel, copper, hard plastic and other materials below HRC50. Widely used in maintenance departments, machine shops, and other industries. Use on machining centers, CNC lathes, drill presses and bench drills.
★ Spiral Flutes — The spiral groove facilitates the export of metal chips, which saves time and effort in operation. Sharp flutes provide fast, neat and smooth cuts. Provides faster cutting speeds than other substrates and is harder but more brittle. Be careful and control your CNC speed.
★ K35 Tungsten Carbide — It is a micro grain tungsten-cobalt alloy with an average cobalt content of 10%. The solid carbide drill bits has high hardness (91.5HRA), wear resistance, corrosion resistance, high strength, bending resistance and high heat resistance.
★ Useful Tips — Keep cool and gentle when using. Not recommended for use with a hand drill (easy to shake, poor stability). If there is a problem with chip evacuation, go back in time and remove the chips. Drill metal with high hardness, the rotational speed should be slower than normal drilling.
CoCud Solid Carbide Drill Bits, 4.95mm Diameter, K35 Tungsten Carbide Precision Mini Twist Drill Bits – (Applications: for Stainless Steel Alloy Metal), 1-Piece
Attributes:
* Drilling Diameter: 4.95mm / 0.195″
* Tool Flute Length: 25mm / 0.98″
* Shank Diameter: 4.95mm / 0.195″
* Overall Length: 50mm / 1.97″
* Material: K35 Tungsten Carbide
* Average Cobalt Content: 10%
* Tool Flute Type: Spiral
* Cutting Hardness: up to HRC50
* Processing Technology: Fine Grinding
What Is Included:
* 1 Piece x Carbide Drill Bits
Applications & Features:
— Suitable for drilling stainless steel, alloy steel, carbon steel, die steel, tool steel, copper, hard plastic and other materials below HRC50. Widely used in maintenance departments, machine shops, and other industries. Use on machining centers, CNC lathes, drill presses and bench drills. The correct lubricant can facilitate cutting or cooling, make cutting easier, and improve dimensional accuracy and extend tool life
— K35 tungsten carbide is a micro grain tungsten-cobalt alloy with an average cobalt content of 10%. The solid carbide drill bits has high hardness (91.5HRA), wear resistance, corrosion resistance, high strength, good bending resistance and high heat resistance. Provides faster cutting speeds than other substrates and is harder but more brittle. Carbide material with good drilling properties ensures high working efficiency. Sharp spiral flutes provide fast, neat and smooth cuts. The spiral groove facilitates the export of metal chips, which saves time and effort in operation.
Useful Tips:
— Keep cool and gentle when using. Not recommended for use with a hand drill (easy to shake, poor stability). If there is a problem with chip evacuation, go back in time and remove the chips. Be careful and control your CNC speed. Drill metal with high hardness, the rotational speed should be slower than normal drilling.
★ Carbide Drill Bit Size — Drilling diameter: 4.95mm / 0.195″; tool flute length: 25mm / 0.98″; shank diameter: 4.95mm / 0.195″; overall length: 50mm / 1.97″; tool flute type: spiral; cutting hardness: up to HRC50; processing technology: fine grinding
★ Wide Applications — Suitable for drilling stainless steel, alloy steel, carbon steel, die steel, tool steel, copper, hard plastic and other materials below HRC50. Widely used in maintenance departments, machine shops, and other industries. Use on machining centers, CNC lathes, drill presses and bench drills.
★ Spiral Flutes — The spiral groove facilitates the export of metal chips, which saves time and effort in operation. Sharp flutes provide fast, neat and smooth cuts. Provides faster cutting speeds than other substrates and is harder but more brittle. Be careful and control your CNC speed.
★ K35 Tungsten Carbide — It is a micro grain tungsten-cobalt alloy with an average cobalt content of 10%. The solid carbide drill bits has high hardness (91.5HRA), wear resistance, corrosion resistance, high strength, bending resistance and high heat resistance.
★ Useful Tips — Keep cool and gentle when using. Not recommended for use with a hand drill (easy to shake, poor stability). If there is a problem with chip evacuation, go back in time and remove the chips. Drill metal with high hardness, the rotational speed should be slower than normal drilling.
CoCud Reduced Shank Twist Drill Bits, 14.5mm Cutting Edge, Titanium & Nitride Coated High Speed Steel 4341 – (Applications: for Stainless Steel Drilling Machine)
Attributes:
* Cutting Edge Diameter: 14.5mm / 0.57″
* Shank Diameter: 10mm / 0.39″
* Cutting Edge Length: 52mm / 2.05″
* Overall Length: 150mm / 6″
* Material: High Speed Steel 4341
* Finish: Titanium & Nitride Coated
* Shank Type: Tri-flat Shank
What Is Included:
* 1 Piece x Reduced Shank Drill Bits
Applications & Features:
— Widely used for drilling stainless steel, aluminum alloy, iron, copper, brass, hard wood, hard plastic, and other metal materials in maintenance departments, machine shops, and other industries. For use on drill presses and bench drills. Selecting the correct lubricant is beneficial for cutting or cooling. Makes cutting easier, improves dimensional accuracy and extends tool life. Tri-flat on the shank is constructed for tighter clamping and precise drilling.
— The straight shank drill is made of 4341 high-speed steel, with high hardness, good toughness, high strength, and high wear resistance. The dual coating of gold titanium and black nitride provides better lubricant application, smoother drilling, and is more durable and corrosion resistant than regular black surfaces. Sharp spiral flutes provide fast, neat and smooth cuts. The spiral groove facilitates the export of metal chips, which saves time and effort in operation. Reduced shank drill bits expand the size range capacity of portable drill chucks.
Useful Tips:
— Drilling edges with burrs: Reduce the number of holes drilled and check various cutting conditions to ensure proper tool handling. Reduce forward and reverse speed. Use harder aluminum and wood. Select the appropriate cutting parameters. Drill metal with high hardness, the rotational speed should be slower than normal drilling.
★ Drill Bit Size — Cutting edge diameter: 14.5mm / 0.57″; shank diameter: 10mm / 0.39″; cutting edge length: 52mm / 2.05″; overall length: 150mm / 6″; shank type: tri-flat shank ( tighter clamping and precise drilling.)
★ Wide Applications — Widely used for drilling stainless steel, aluminum alloy, iron, copper, brass, hard wood, hard plastic. For use on drill presses and bench drills. Reduced shank drill bits expand the size range capacity of portable drill chucks.
★ Dual Coatings — The dual coatings of gold titanium and black nitride provides better lubricant application, smoother drilling, and is more durable and corrosion resistant than regular black surfaces.
★ High Speed Steel — The straight shank drill is made of 4341 high-speed steel, with high hardness, good toughness, high strength, and high wear resistance. Sharp spiral flutes provide fast, neat and smooth cuts.
★ Useful Tips — Choosing the correct lubricant is beneficial for cutting or cooling. Makes cutting easier, improves dimensional accuracy and extends tool life. Check various cutting conditions to ensure proper tool handling.
CoCud Solid Carbide Drill Bits, 6.15mm Diameter, K35 Tungsten Carbide Precision Mini Twist Drill Bits – (Applications: for Stainless Steel Alloy Metal), 1-Piece
Attributes:
* Drilling Diameter: 6.15mm / 0.242″
* Tool Flute Length: 33mm / 1.3″
* Shank Diameter: 6.15mm / 0.242″
* Overall Length: 55mm / 2.17″
* Material: K35 Tungsten Carbide
* Average Cobalt Content: 10%
* Tool Flute Type: Spiral
* Cutting Hardness: up to HRC50
* Processing Technology: Fine Grinding
What Is Included:
* 1 Piece x Carbide Drill Bits
Applications & Features:
— Suitable for drilling stainless steel, alloy steel, carbon steel, die steel, tool steel, copper, hard plastic and other materials below HRC50. Widely used in maintenance departments, machine shops, and other industries. Use on machining centers, CNC lathes, drill presses and bench drills. The correct lubricant can facilitate cutting or cooling, make cutting easier, and improve dimensional accuracy and extend tool life
— K35 tungsten carbide is a micro grain tungsten-cobalt alloy with an average cobalt content of 10%. The solid carbide drill bits has high hardness (91.5HRA), wear resistance, corrosion resistance, high strength, good bending resistance and high heat resistance. Provides faster cutting speeds than other substrates and is harder but more brittle. Carbide material with good drilling properties ensures high working efficiency. Sharp spiral flutes provide fast, neat and smooth cuts. The spiral groove facilitates the export of metal chips, which saves time and effort in operation.
Useful Tips:
— Keep cool and gentle when using. Not recommended for use with a hand drill (easy to shake, poor stability). If there is a problem with chip evacuation, go back in time and remove the chips. Be careful and control your CNC speed. Drill metal with high hardness, the rotational speed should be slower than normal drilling.
★ Carbide Drill Bit Size — Drilling diameter: 6.15mm / 0.242″; tool flute length: 33mm / 1.3″; shank diameter: 6.15mm / 0.242″; overall length: 55mm / 2.17″; tool flute type: spiral; cutting hardness: up to HRC50; processing technology: fine grinding
★ Wide Applications — Suitable for drilling stainless steel, alloy steel, carbon steel, die steel, tool steel, copper, hard plastic and other materials below HRC50. Widely used in maintenance departments, machine shops, and other industries. Use on machining centers, CNC lathes, drill presses and bench drills.
★ Spiral Flutes — The spiral groove facilitates the export of metal chips, which saves time and effort in operation. Sharp flutes provide fast, neat and smooth cuts. Provides faster cutting speeds than other substrates and is harder but more brittle. Be careful and control your CNC speed.
★ K35 Tungsten Carbide — It is a micro grain tungsten-cobalt alloy with an average cobalt content of 10%. The solid carbide drill bits has high hardness (91.5HRA), wear resistance, corrosion resistance, high strength, bending resistance and high heat resistance.
★ Useful Tips — Keep cool and gentle when using. Not recommended for use with a hand drill (easy to shake, poor stability). If there is a problem with chip evacuation, go back in time and remove the chips. Drill metal with high hardness, the rotational speed should be slower than normal drilling.
CoCud Solid Carbide Drill Bits, 6.35mm Diameter, K35 Tungsten Carbide Precision Mini Twist Drill Bits – (Applications: for Stainless Steel Alloy Metal), 1-Piece
Attributes:
* Drilling Diameter: 6.35mm / 0.25″
* Tool Flute Length: 32mm / 1.26″
* Shank Diameter: 6.35mm / 0.25″
* Overall Length: 55mm / 2.17″
* Material: K35 Tungsten Carbide
* Average Cobalt Content: 10%
* Tool Flute Type: Spiral
* Cutting Hardness: up to HRC50
* Processing Technology: Fine Grinding
What Is Included:
* 1 Piece x Carbide Drill Bits
Applications & Features:
— Suitable for drilling stainless steel, alloy steel, carbon steel, die steel, tool steel, copper, hard plastic and other materials below HRC50. Widely used in maintenance departments, machine shops, and other industries. Use on machining centers, CNC lathes, drill presses and bench drills. The correct lubricant can facilitate cutting or cooling, make cutting easier, and improve dimensional accuracy and extend tool life
— K35 tungsten carbide is a micro grain tungsten-cobalt alloy with an average cobalt content of 10%. The solid carbide drill bits has high hardness (91.5HRA), wear resistance, corrosion resistance, high strength, good bending resistance and high heat resistance. Provides faster cutting speeds than other substrates and is harder but more brittle. Carbide material with good drilling properties ensures high working efficiency. Sharp spiral flutes provide fast, neat and smooth cuts. The spiral groove facilitates the export of metal chips, which saves time and effort in operation.
Useful Tips:
— Keep cool and gentle when using. Not recommended for use with a hand drill (easy to shake, poor stability). If there is a problem with chip evacuation, go back in time and remove the chips. Be careful and control your CNC speed. Drill metal with high hardness, the rotational speed should be slower than normal drilling.
★ Carbide Drill Bit Size — Drilling diameter: 6.35mm / 0.25″; tool flute length: 32mm / 1.26″; shank diameter: 6.35mm / 0.25″; overall length: 55mm / 2.17″; tool flute type: spiral; cutting hardness: up to HRC50; processing technology: fine grinding
★ Wide Applications — Suitable for drilling stainless steel, alloy steel, carbon steel, die steel, tool steel, copper, hard plastic and other materials below HRC50. Widely used in maintenance departments, machine shops, and other industries. Use on machining centers, CNC lathes, drill presses and bench drills.
★ Spiral Flutes — The spiral groove facilitates the export of metal chips, which saves time and effort in operation. Sharp flutes provide fast, neat and smooth cuts. Provides faster cutting speeds than other substrates and is harder but more brittle. Be careful and control your CNC speed.
★ K35 Tungsten Carbide — It is a micro grain tungsten-cobalt alloy with an average cobalt content of 10%. The solid carbide drill bits has high hardness (91.5HRA), wear resistance, corrosion resistance, high strength, bending resistance and high heat resistance.
★ Useful Tips — Keep cool and gentle when using. Not recommended for use with a hand drill (easy to shake, poor stability). If there is a problem with chip evacuation, go back in time and remove the chips. Drill metal with high hardness, the rotational speed should be slower than normal drilling.
CoCud Twist Drill Bits, 10.5mm Cutting Edge, Titanium & Nitride Coated High Speed Steel 4341 Round Shank – (Applications: for Stainless Steel Drilling Machine), 1-Piece
Attributes:
* Cutting Edge Diameter: 10.5mm / 0.41″
* Shank Diameter: 10.5mm / 0.41″
* Cutting Edge Length: 88mm / 3.46″
* Overall Length: 140mm / 5.5″
* Material: High Speed Steel 4341
* Finish: Titanium & Nitride Coated
* Shank Type: Round Shank
What Is Included:
* 1 Piece x Twist Drill Bits
Applications & Features:
— Widely used for drilling stainless steel, aluminum alloy, iron, copper, brass, hard wood, hard plastic, and other metal materials in maintenance departments, machine shops, and other industries. For use on drill presses and bench drills. Selecting the correct lubricant is beneficial for cutting or cooling. Makes cutting easier, improves dimensional accuracy and extends tool life.
— The straight shank drill is made of 4341 high-speed steel, with high hardness, good toughness, high strength, and high wear resistance. The dual coating of gold titanium and black nitride provides better lubricant application, smoother drilling, and is more durable and corrosion resistant than regular black surfaces. Sharp spiral flutes provide fast, neat and smooth cuts. The spiral groove facilitates the export of metal chips, which saves time and effort in operation.
Useful Tips:
— Drilling edges with burrs: Reduce the number of holes drilled and check various cutting conditions to ensure proper tool handling. Reduce forward and reverse speed. Use harder aluminum and wood. Select the appropriate cutting parameters. Drill metal with high hardness, the rotational speed should be slower than normal drilling.
★ Drill Bit Size — Cutting edge diameter: 10.5mm / 0.41″; shank diameter: 10.5mm / 0.41″; cutting edge length: 88mm / 3.46″; overall length: 140mm / 5.5″; shank type: round shank
★ Wide Applications — Widely used for drilling stainless steel, aluminum alloy, iron, copper, brass, hard wood, hard plastic, and other metal materials in maintenance departments, machine shops, and other industries. For use on drill presses and bench drills.
★ Dual Coatings — The dual coatings of gold titanium and black nitride provides better lubricant application, smoother drilling, and is more durable and corrosion resistant than regular black surfaces.
★ High Speed Steel — The straight shank drill is made of 4341 high-speed steel, with high hardness, good toughness, high strength, and high wear resistance. Sharp spiral flutes provide fast, neat and smooth cuts.
★ Useful Tips — Choosing the correct lubricant is beneficial for cutting or cooling. Makes cutting easier, improves dimensional accuracy and extends tool life. Check various cutting conditions to ensure proper tool handling.